Berlin Diagnostics Interface (COM9) Driver

admin 1/7/2022

Hi Guys,

Recently i managed to install this software to my laptop and connect it to my E90 320d using K+DCAN cable. It is very good software to troubleshoot, diagnose fault, coding, workshop manual and register new battery with step by step guides. if not mistaken, BMW service centers and dealers also using this software.

D-Link HSPADataCard Diagnostics Interface (COM12) driver manufacturer is D-Link Corporation and developed by D-Link Corporation in the database contains 1 versions.Free Download Qualcomm HS-USB Android Diagnostic 9018 Driver 2.0.1000.0 for Windows 7 (Mobile Phones).PC Pitstop offers free computer help, use our free PC Diagnostics to tuneup your computer. Our innovative program tools will help you connect to remote equipment over Ethernet and configure it from any networked computer. At Eltima Software, we’re committed to delivering reliable and scalable applications for USB and serial port virtualization, monitoring, and redirection to remote desktops, cloud infrastructures, virtual environment, and multi-user systems over LAN and the Internet. Master Mst-9001d Diesel Engine Ecu Test Bench Phs For Mst-9000+ Sensor Signals Fuel Injector Condition Obd Diagnostic Interface, Find Complete Details about Master Mst-9001d Diesel Engine Ecu Test Bench Phs For Mst-9000+ Sensor Signals Fuel Injector Condition Obd Diagnostic Interface,Master Mst-9001d Diesel Engine,Ecu Test Bench Phs Master Mst-9001d,Mst-9000+ from Diagnostic Tools Supplier. To find the latest driver for your computer we recommend running our Free Driver Scan. ZTE Diagnostics Interface (COM9) - Driver Download. Vendor: ZTE Communication.

Interface and lead you trough the installation, if needed point it to the driver you previously downloaded and extracted. Next Step.-Go to Start Menu-On Computer right click on mouse and go to Manage-Go to Device Manager-Go to Ports (COM & LPT)-Right Click on USB Serial Port (COM9) and go to properties.

it took me about two weeks to install and figure out how to connect to my car. here I share back the step by step guides how to install it for our benefit also for my future reference. thanks to those share files online..

Step 1: Download the program (prepare space around 25gb)!T…cK2dXatqDc_Q3YA

Step 2: Download and install RC cleaner!Sp…f1vYPQ1ACBIC8tM

Step 3: Download this instruction and follow the instruction how to install the software

Berlin Diagnostics Interface (com9) Drivers

To connect to E90, you needK+DCAN cable and I purchased the cable from here. For F series, you need to buy enet cable.

To configure K+DCAN cable to E90, you need to install BMW Standard Tools 2.12 and can be downloaded from here. (choose COM9)

Connect the K+DCAN cable and install the driver and follow this step to set the COM port no (choose COM9)

That’s it. Connect the OBD cable from OBD2 socket to laptop, start your engine and enjoy!!

Some screenshot:

Wish this helps.

Related Post:

This article show the guide on how to configure and verification with ISTA+.And following information is freely available on the internetThe following information is freely available on the internet, however, has been consolidated here to help the DIYer in interface configuration (Rheingold, ISTA-D and ISTA+ all are all simultaneous and are used interchangeably).

And here are other two guide on interface configure on BMW ISTA+.

BMW ENET Configuration and Verification With BMW ISTA

BMW ICOM Configuration and Verification With BMW ISTA


BMW ISTA Download & Installation & Usermanual


How To Install BMW Rheingold ISTA Software

BMW Rheingold ISTA 4.07.22/4.03.21 Free download Win7/Win8/Win10

BMW Rheigold ISTA Usermanual Download

Procedures of Configuration K+DCAN with BMW ISTA:

1. Plug your K+D-CAN cable and install drivers. For FTDI based cables use latest drivers.

2. Open “Device Manager”, then USB Serial Port properties, go to “Port Settings” tab and click “Advanced…”. Change port number to “COM9” and latency timer to “1”. Confirm configuration via “OK” button.

3.Open C:EDIABASBINEDIABAS.INI with Notepad and check for “Interface = STD:OBD”. In TCP settings set “Port = 6801”.

4.Open C:EDIABASBINOBD.INI with Notepad and check for “Port=Com9”.

5.Connect car with K+D-CAN cable to PC.


6.Now run BMW Rheingold ISTA using shortcut in start menu and wait until it boots, then press settings button.

7.Select “VCI Config” tab and “Ediabas standard settings (ediabas.ini)”, then “OK”.

8.Go “Operations”, then “Read Out Vehicle Data” and “Complete Identification”.


How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

This Post: K+DCAN Configuration and Verification With BMW ISTA From ChinaOBD2 Official Blog

Berlin Diagnostics Interface (com9) Driver Updater


Berlin Diagnostics Interface (com9) Driver Windows 7

Please keep this link if you copy the post!