USBALTAIR2 Converter Driver

admin 1/7/2022

Created on: 27 March 2014

  1. Usbaltair2 Converter Drivers

US232R cables from FTDI Chip allow a RS-232 serial port to be added to a PC via the USB port.

RS-232 ports can be very useful for connecting a PC to embedded systems and other electronic devices such as the Raspberry PI.

These USB to serial RS232 Converters need to have drivers installed when using the converters in Windows.

Driver

Device driver the Video-to-USB converter, manufactured by The Imaging Source. August 19, 2011. Intel Core i3 or similar, 2 GB RAM; USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit. Usb 2.0 To Ethernet Adapter Driver free download - VIA USB 2.0 Host Controller Driver, Realtek RTL8187B Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter, Chicony USB 2.0 Camera, and many more. The new USB2Air wireless USB extension adapter from HuddleCamHD has been designed to wirelessly transmit high-definition video up to 25 feet between the device transceivers.

This article shows how to download and install drivers for the converter cables.

Windows 8 and a US232R-100 model converter cable are used as an example in this article, but other cable models and other versions of Windows will operate in a similar way.

Using the cables in Linux will usually not require drivers to be installed. The article on connecting a Raspberry PI board to a Linux computer using a USB to serial port converter cable shows how to connect to the cable's serial port using minicom on a Linux PC.

Usbaltair2 converter driver download

Downloading and Installing the Drivers

Usbaltair2 converter driver downloadUsbaltair2 converter drivers

This video shows how to download and install the VCP (Virtual COM Port) drivers in Windows 8:

Virtual COM Port (VCP)

VCP drivers are installed to configure the cable as a Virtual COM Port in Windows.

When configured as a VCP, the USB to serial converter cable will appear as a COM port in Device Manager or other applications that connect to the COM port, e.g. the port will appear as COM3, COM4, etc.

Terminal emulator software can connect to the converter cable by selecting the correct COM port in the software.

Usbaltair2 Converter Drivers

Articles Menu